The CP1181 is one of the OPTRANS series chips designed by Chiphomer Technology Limited. It is designed for add/drop multiplexer, terminal multiplexer, dual and single unidirectional ring applications. 21 E1/T1 signals are mapped to and from asynchronous TU12. The CP1181 interfaces to a byte-wide 19.44 MHz Telecom Bus.
FEATURES
• Asynchronously mapping/de-mapping 21 E1 or T1 traffics into/from STM-1. T1 traffic mapping path is T1 -> VC11 -> TU12.
• Configurable receive and transmit TU12 time-slots via microprocessor
• Detects loss of input clock on Telecom Bus
• Interprets TU12 pointer according to G.783 (2000/10) and G.707 (2000/10)
• Detects LOM, TU-LOP and TU-AIS alarms
• Detects Remote Defect Indication (RDI), Remote Error Indication (REI), RFI alarm and Path Label Mismatch (PLM) alarm
• Provides 12-bit performance counters for BIP-2 errors and 11-bit performance counters for tributary REI errors
• Detects degraded signals(DEG) and Excessive Error defects (EXC) based on received BIP-2 errors.
• Extracts the 16-byte J2 sequence into microprocessor accessible registers, and checks the J2 sequence to detect TIM alarm
• Detects the K4 (bit5-bit7) and V5 bit8 for Enhanced Defect Indicator (E-RDI)
• Captures filtered K4 byte into microprocessor accessible registers
• Extracts V5 and K4 bytes into microprocessor accessible registers
• Extracts N2 byte and O bits into microprocessor accessible registers
• Supports1+1 Path-protection
• Integrated bit-leaking circuit and DPLL
• The output jitter of E1/T1 data (either mapping jitter or combined jitter) is compliant with G.783 (2000/10)
• E1/T1 Port #0 to Port #7 can be configured to work in re-timing mode
• Supports the code-rate adjustment
• Optionally inserts VC-AIS and TU-AIS into upstream data
• Generates the TU12 pointer (V1, V2) per ITU G.783
• The TU12 pointer value is fixed on 105
• Calculates the BIP-2 and inserts into outgoing data stream, optionally inserts single or continued BIP-2 errors
• Inserts RDI/REI from either internal generation or microprocessor
• Inserts 16-byte programmable J2 sequence
• Inserts E-RDI from either internal generation or microprocessor
• Inserts programmable N2 byte and O bits
• Controlled High-Z output on transmit Telecom Bus
• Provides three bus timing modes for transmit Telecom Bus
• Build-in PRBS test function can be configured to any one of all 21 E1/T1 ports
• Provides 16-bit Intel/Motorola microprocessor interface
• 3.3V supply with 5V tolerant I/O
• IEEE 1149.1 JTAG boundary scan
• Maximum power less than 1.0 Watt
• Operating industrial temperature range: -40 ℃ ~ 85 ℃
• TEBGA-272 package
• CH5008: 8ch E1 LIU
• CP5009: 8ch E1/T1/J1 LIU
• CP1122: STM-1 Single Chip Add/Drop Multiplexer System device
• CP1121: STM-1/4 Single Chip Add/Drop Multiplexer System device
