 |
 |
| |
Octal E1 Transceiver Chip |
| OVERVIEW |
| Octal E1 Transceiver CP5028 is one of the ETLINK series chips designed by Chiphomer Technology Company, it integrates eight independent E1 transceivers into a single chip. Each E1 transceiver works functionally as CP5021, which provide complete function of E1 line interface and E1 Framer. |
| |
| FEATURES |
• Eight channels E1 transceiver
• Onboard line interface for clock/data recovery and waveshaping
• Supports 75ohm E1 coaxial and 120ohm E1 twisted pair applications
• 32-bit or 64-bit jitter attenuator
• Loss of signal indication with programmable thresholds according to ITU G.775, ETS 300 233
• E1 Framer support framed or unframed data reception and transmission
• The transmit and receive sections of each transceiver are fully independent
• Frames FAS, CAS, CCS and CRC-4 formats
• Each transceiver contains two 512-bit elastic buffers respectively for receive and transmit direction, controlled slip capability and slip indication
• Supports Sa and Si bits insertion and extraction
• Provides 4 performance monitor counters for bipolar and code violations, CRC-4 errors, E bits and FAS word errors
• Detects and generates various alarm including RCL, RLOS, AIS, RRA, RDMA, RSA1, RSA0, RSC, RUA0.
• Integrated signaling controller
• Inserts and Extracts CAS signaling
• HDLC controller with two 64-byte buffers
• Support four separate loop-backs for testing functions
• 8-bit microprocessor interface supports both Intel and Motorola bus mode.
• JTAG boundary scan meet IEEE 1149.1
• CMOS 3.3 V technology£¬5 V tolerant inputs
• Maximum power ¡Ü 800 mill watt
• Operating Industrial temperature range: -40¡æ ~ 85¡æ
• LQFP-208 package |
| |
| APPLICATIONS |
• PBX
• Digital Access Cross Connect Systems (DACS)
• SONET/SDH Add/Drop Multiplexer
• VoIP Gateways, Multiplexer |
|
 |
|
LQFP-208
-40 oC ~ 85 oC |
| |
| |
| |
| |
| |
|
| TYPICAL APPLICATION |
 |
| |
|
